The Ava court in a soft light beige that sits close to bare skin, so the leg reads longer under a hem. The 5cm heel and EE-EEE toe area give the bunion room, making it a nude court that actually fits a wide forefoot. Fits EE-EEE, true to size.
Origin
Handcrafted in Portugal at a family-run factory in the Porto region
Browse more images of the Ava - Light Beige Leather Pumps:
Our Review
The light beige Ava is the court I wear when I want my legs to look longer, because a nude close to my own skin lengthens the line under a midi or a tea dress where black would chop it off. It is the same comfortable court underneath, a low 5cm heel and an EE-EEE toe area that lets my bunion sit without pressing. The arch support carries it through a daytime wedding or a spring work day on my feet. I treat the pale leather gently, since light shades show scuffs at the toe. True to size for me across the EE-EEE width.
Pros
5 cm kitten heel keeps pitch low for all-day wear
Extra width and volume in the toe area accommodates the bunion joint
EE-EEE width range covers most wide feet
Neutral beige works across work and event outfits
Cons
Light beige leather shows scuffs more readily than darker shades
No E-width option for narrower wide feet
Court silhouette without a strap relies on the toe box fit to keep the shoe on
The Hallie Mary-Jane court in soft almond leather, a warm nude-tan that lengthens the leg where black would cut it short. A stable 5cm block heel and EEE toe area keep the bunion comfortable while the strap holds the foot. Fits up to EEE, true to size.
Style
Mary Jane court shoe with pointed toe
Material
Almond patent leather upper, lamb leather lining
Heel
5cm block heel
Finish
Glossy patent
Fit
Fits up to EEE width
Toe box
Pointed toe over a wide toe box, bunion-friendly fit
Insole
Cushioned, arch-supported
Best for
Office, evening events, weddings
Origin
Designed in the UK, handcrafted in Porto, Portugal
Browse more images of the Hallie - Almond Leather Pumps:
Our Review
Almond is the Hallie I wear when I want a warm nude court that makes my legs look longer under a hem, since the soft tan tone blurs into the leg. The strap holds my foot and the 5cm block keeps me steady through a work day or an evening. The EEE width means the pointed toe sits ahead of my toes while my bunion has room. It pairs with cream, camel and tailoring. Fits up to EEE, true to size.
Pros
5cm block heel sits in the all-day wearable range
Mary Jane strap holds the shoe on the foot without pressing the bunion joint
Pointed toe over Calla's wide toe last so the shape is slimmer than the foot inside
EEE width cap with lamb leather lining
Cons
Patent finish shows scuffs and scratches more visibly than matt leather
Pointed toe is a closer-cut shape than the round-toe styles in the range
The Sophia high-heel court in light beige goats leather, a pale nude that lengthens the leg on a 3 inch (about 7.5cm) heel with a half-inch platform. The platform reduces the pitch on the big toe joint while the goats leather flexes over the bunion. Fits up to EE, true to size.
Origin
Handcrafted in Portugal at a family-run factory in the Porto region
Browse more images of the Sophia - Light Beige Leather Pumps:
Our Review
Light beige is the Sophia I wear when I want height and a longer-looking leg, since the pale nude blurs into the leg under a hem. The 3 inch heel is softened by the half-inch platform, so my weight isn't tipped fully onto my bunion, and the goats leather flexes where my forefoot needs it. The leather-lined arch-supported insole holds me through an occasion. I pair it with a midi or tailored trousers. Fits up to EE, true to size.
Pros
Goats leather flexes around the forefoot where bunions sit
Half-inch platform reduces the effective pitch of the 3-inch heel
Light beige sits with most occasion outfits as a neutral
Hidden stretch panel over the bunion area
Cons
Light beige shows scuffs and marks faster than darker tones
3-inch heel sits at the upper end for all-day wear
Width caps at EE so EEE feet should look elsewhere
The Edith is Calla's T-bar heel on a low flared heel, with a wide front strap that gives the bunion room, here in champagne metallic leather. The wide strap also suits a forefoot prone to Morton's neuroma, while the low heel keeps it easy to wear. Fits up to EE, true to size.
Origin
Handcrafted in Portugal at a family-run factory in the Porto region
Browse more images of the Edith - Champagne Leather Kitten Heels:
Our Review
Champagne Edith is the T-bar I wear for festive parties, since the soft champagne metallic catches the light without the brightness of full silver. The low flared heel gives just enough lift to feel dressed-up while staying easy on my feet. The wide front strap is the clever part, because it gives my bunion room and covers the joint, and it eases the forefoot pressure I get from Morton's neuroma in narrower shoes. It dresses up jeans or a party dress. Fits up to EE, true to size.
Pros
Wide front strap gives room across the forefoot where bunions sit
T-bar holds the foot in place over the instep
Low flared heel set under the mid-foot keeps the centre of gravity stable
Strap layout also accommodates Morton's neuroma
Cons
Champagne metallic marks more visibly than matt finishes
Open-strap design exposes the foot to dust and weather
Width caps at EE so EEE feet should look elsewhere
The Daisy is Calla's bow-detail occasion sandal, with super-soft straps and a little bow on a block heel, here in champagne metallic with a subtle shimmer. It is cut with more room than ever, so the soft straps and stretch fit give the bunion space. Fits up to EEE, true to size.
Browse more images of the Daisy - Champagne Metallic Block Heels:
Our Review
Champagne Daisy is the occasion sandal I wear when I want a soft shimmer rather than a bright metallic, since the champagne reads gently dressed-up at a daytime wedding or a garden party. The super-soft straps and the extra room are what sell it for me, because most occasion sandals dig in and these give my bunion space. The little bow keeps it pretty without trying too hard. The block heel is steadier than a stiletto for a long event. Fits up to EEE, true to size.
Comfy Champagne Leather Block Heeled Sandals for Bunions and Wide Feet
True to size
Fits up to WW width feet
Crafted from smooth champagne leather, the high block heel creates a striking silhouette while offering added stability and support. Finished with a cushioned insole, a wide toe box, and bunion-friendly stretch lining, they provide extra comfort and flexibility, while the secure straps ensure a confident fit - perfect for evenings, events, or special occasions.
The same square-toe slingback in a warm toffee patent that sits close to a nude against bare legs, lengthening the leg where black would cut a hard line. A stable 4.5cm block heel and a stretch panel that flexes over the big toe joint carry you through a garden party or a terrace lunch. Fits EE, true to size.
Origin
Handcrafted in Portugal at a family-run factory in the Porto region, designed in the UK
Material
Toffee patent leather upper, lamb leather lining
Heel
4.5 cm block heel
Toe
Square toe
Fit
True to size
Width
Fits EE width feet best
Toe box
Wide Calla last with hidden bunion-friendly stretch panel
Footbed
Cushioned insole
Best for
Work wear with tailored trousers, evening with denim and a blazer
Browse more images of the Betty - Toffee Patent Slingbacks:
Our Review
I keep the toffee pair for the warmer months, when a black shoe feels too severe against linen and cream and I want something that softens into the outfit instead of punctuating it. Against bare legs the caramel patent almost disappears, so my leg looks longer, which is exactly what I want at a daytime wedding or a garden party. The 4.5cm block heel sinks far less than a stiletto would on grass, and the open slingback keeps my foot cool when the sun is out. As with the black, the stretch panel sits over my bunion and gives as I walk, so the joint isn't pressed against a hard patent edge through a long afternoon of standing. True to size on me at an EE.
Pros
4.5 cm block heel adds height while keeping a stable footprint
Square toe gives extra space across the toe joints
Toffee patent works with browns
Creams and denim
Stretch panel flexes over the bunion area
Cons
Patent finish scuffs show against the glossy surface
EE width fit best so EEE feet may feel snug
Slingback strap can rub the heel during the first few wears
The Petra is Calla's flat slingback, a square toe finished with a bow on a low heel, here in black leather. The cushioned insole and discreet stretch panel flex over the bunion, so a low slingback stays comfortable all day. Fits EE, true to size.
Style
Slingback with bow detail across the vamp
Material
Black leather upper, lamb leather lining
Heel
Low heel
Toe shape
Square toe
Fit
True to size, fits EE width feet best
Toe box
Wide toe box with discreet stretch panel across the bunion area
Insole
Cushioned
Best for
Workwear with tailored trousers, midi dresses, denim and a blazer for evenings
Origin
Designed in the UK, handcrafted in Porto, Portugal
Browse more images of the Petra - Black Leather Slingbacks:
Our Review
Black Petra is the flat slingback I wear when I want the look of a court without the height, since the square toe and the little bow keep it smart while the low heel is kind to my feet. The stretch panel flexes over my bunion so the joint isn't pinched, and the cushioned insole supports a full day. The open slingback keeps it from feeling closed-in in warmer weather. I wear it with tailored trousers or a midi for work. Fits EE, true to size.
Pros
Square toe gives the forefoot horizontal room without widening the heel
Hidden stretch panel flexes across the bunion joint
Slingback strap holds a fit that does not need to grip the heel rigidly
Low heel pitch for full-day office wear
Cons
EE width cap is narrower than the EEE flats in the range
Slingback strap can slip on narrower heels and may need adjusting through the day
Leather upper benefits from a protector spray before first wear
The Emily heeled sandal in soft champagne leather with a gentle shimmer, the daytime-occasion version on a 3.5 inch heel and half-inch platform. The straps conceal the bunion while the platform eases the pitch off the forefoot. Fits up to EE, true to size.
Origin
Handcrafted in Portugal at a family-run factory in the Porto region
Browse more images of the Emily - Champagne Leather Heeled Sandals:
Our Review
Champagne Emily is the tall sandal I wear to a daytime wedding or summer party, since the soft shimmer is dressed-up without the brightness of a full metallic. The 3.5 inch heel sits on a half-inch platform, so the pitch is eased and my bunion isn't taking my weight through a long event. The straps conceal the joint and the arch support keeps me standing. It suits the wider-toe, narrower-heel shape of my foot. Fits up to EE, true to size.
Pros
3.5 inch heel softened by a half-inch platform reduces forefoot pressure
Straps positioned to sit around the bunion rather than across it
Lamb leather lining flexes over the joint
Handcrafted in Portugal with arch-supported cushioned insole
Cons
EE width cap rules out EEE feet
3.5 inch heel is at the upper end of the range for long wear
Light champagne leather will show scuffs more readily than darker shades
The Ruby sandal in champagne leather with a soft shimmer, dressy enough for a summer wedding but neutral enough to wear all day. The strap still covers the bunion and the moleskin 'hallux' panel cushions the joint, so an occasion on your feet stays comfortable. Fits EE-EEE, true to size.
Origin
Handcrafted in Porto, Portugal
Material
Champagne leather upper, lamb leather lining
Heel
Flat toe-post sandal
Fit
True to size
Width cap
EE to EEE
Bunion cover
Strap positioned to conceal the big toe joint, hidden moleskin hallux panel
Browse more images of the Ruby - Champagne Leather Sandals:
Our Review
I keep the champagne pair for summer occasions, because the soft shimmer reads as dressed-up at a wedding or a garden party without shouting the way a bright gold would. It is still the bunion-friendly Ruby underneath, so the strap covers my joint and the moleskin panel cushions it through hours of standing for photographs. The arch-supported footbed is what lets me stay in them from the ceremony to the evening rather than going barefoot by the speeches. It sits beautifully against blush, cream and pale florals. True to size on me at an EE-EEE.
Pros
Strap positioned to cover the big toe joint while keeping a toe-post silhouette
Hidden moleskin hallux panel against the joint
Arch-supported cushioned insole under the foot
EE-EEE width cap fits wider feet
Cons
Toe-post style takes a few wears to soften against the skin between the first and second toe
Flat profile gives no pitch under the heel
Light champagne leather shows scuffs at the toe edge with regular wear
Which Type of Shoe is Best?
If you’re highly experienced in walking in heels, elongating pumps and stilettos may be suitable for you. The height will enhance your posture and help you carry yourself with grace. This kind of footwear can also boost your confidence, though they do tend to be better for indoor weddings where you’ll have plenty of flat surfaces to walk on.
If you’re a fan of a lower heel, you may wish to look for mules, kitten heels or block-heeled sandals.
Shoes with an ankle strap will give you additional security. Perhaps the wedding is planned for a barn, beach or another kind of uneven landscape? If so, an ankle strap will definitely prove its worth in this situation.You can probably afford to opt for something less formal if an outdoor wedding is planned.
Options that tend to suit any environment include crystal-embellished sandals and classic blush pumps.
Our Tips to Choose Mother of the Bride Shoes
Opt for elegant shoes
It’s essential to look the part whether you’re the mother of the bride or the groom. You are more likely to feel great about yourself if you opt for elegant, great-looking shoes for the big day. It’s normally best for the mother of the bride to wear heels if possible, though these don’t need to be high heels. Experts often recommend a refined type of shoe with a slim or chic block heel. Round, almond and pointed toe-shapes tend to look great, but it’s wise to avoid boxy square toes and heavy shoes as these can be too similar to what you might wear in an office.
Opt for something comfortable
Wedding days tend to be very long days, no matter how much fun you have. The shoes that you opt for need to offer enough comfort so you can wear them all day and night. Chances are you’ll be dancing in them. If you opt for comfortable heels, they should serve you well throughout the occasion. If you’re not quite sure what your shoe size is, you could buy two pairs of shoes in two sizes before returning the one that doesn’t fit. You are likely to inflict pain on yourself if your shoes are too small, but if your shoes are too big you could slip out of them. Spend sufficient time wearing the shoes around the house before the big day so you can get used to them.
Don’t worry about colours matching perfectly
Your mother of the bride shoes don’t need to be the perfect match for your dress colour-wise. Colour-matching can be harder than you think and isn’t as relevant as it once was. Go for a shoe colour that complements your dress, not one that matches it perfectly. Neutral colours will work well in a brighter dress as will metallics. You could also opt for a shoe colour that’s either one or two shades darker than your dress. You can match a black dress with all sorts of colours including black itself.
Think about the time of year
When shopping for mother of the bride shoes, think about what time of year the ceremony is taking place. Some options will look fantastic throughout the year, but others tend to work better in either the winter or the summer. Closed-toe shoes and classic court shoes work well in the winter, with elegant sandals and peep-toe heels being particularly effective in the summer.
Remember that the feet tend to swell during the summer. If a summer wedding is planned, ensure the mother of the bride shoes you buy work well with slightly swollen feet. The feet tend to reach their highest temperature in the afternoon. This is why it’s such a good idea to try them on in the afternoon. This will ensure your feet remain comfortable when temperatures rise. If the wedding is taking place in the summer and you’re likely to be standing on the lawn, think about wedges and avoid stilettos.
Avoid going too high
Heels are very elegant and are an obvious option for your mother of the bride shoes. However, there is no need to opt for six-inch stilettos. It’s best to avoid going any higher than four inches, especially if you don’t wear high heels very often. Seek out shoes that come with extra padding for under the foot. Make sure supportive sandals are available if you are wearing sandals. Women with wider feet tend to opt for shoes that have a deeper, more spacious toe-box.
Obtain a matching handbag
Look for a handbag that works well with your mother of the bride shoes. Although it’s not always a great idea to match your accessories with your dress, matching your accessories can certainly work.
Find suitable mother of the bride shoes
Although finding the right mother of the bride shoes can seem challenging, the effort will be worth it once you have found something that you look and feel great in when the big day arrives.
Great options are available even if you have bunions, wide feet or other problematic foot issues.
Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.